- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Quantity: | |
|---|---|
IC697CPX928
General Electric
GE IC697CPX928 Module Funce PLC
◇ Brand new
◇ Ready for shipment
◇ Factory sealed box
PRODUCT DESCRIPTION
The IC697CPX928 is a Programmable Logic Controller manufactured by GE Automation and Controls. It is designed to fit into a single rack slot and comes with three built-in serial ports. A backplane mounted on the rack allows this device to communicate with several different modules. A run/stop control switch with three positions or specific software running from an attached computer is used to control the IC697CPX928. Seven on-board LED lights display operational status.
Features of this device include a 96MHz 80486DX4 microprocessor, floating point calculations, processor speeds of 0.4 microseconds for each Boolean function, 8K analog I/O, and 12K I/O of any mix. The IC697CPX928 supports several modules, including IC697 LAN interface modules and various display, coprocessor, communications, and link interface modules. IC660/61 bus controllers and IC697 discrete and analog I/O modules are also compatible with this device.
To program this device, connect it to a computer loaded with MS-DOS, Windows 95, or Windows NT. This connection is possible by way of a serial, parallel, or Ethernet interface. For Ethernet connections to the programming computer, special hardware is required. As the IC697CPX928 is programmed via software, hardware setup with DIP switches and jumpers is not required. Device configuration settings can be protected digitally via a password and physically by a keyswitch.
The IC697CPX928 provides six megabytes of user and program data memory. This memory is maintained by a lithium CMOS battery. Up to 256 kilobytes of optional flash memory (NVRAM) is also supported. Operating system firmware is stored in flash memory. Device disassembly or EPROM replacement is not required to update firmware.
In environments where temperatures reach 122 degrees Fahrenheit (50 Celsius), a fan capable of 70 cubic feet per minute (CFM) is required to prevent overheating.
The product manual contains detailed guidelines for installing the IC697CPX928. Rack power should be off before installing. The operation control switch should be in the stop position. The memory protection keyswitch should be in the off position. Place the CMOS battery into one of the battery connection slots. Insert the device into the rack and resume power.
Other Available Revisions for the IC697CPX928
IC697CPX928-44A726758153R01
IC697CPX928-AA
IC697CPX928-BA
IC697CPX928-BB
IC697CPX928-BC
IC697CPX928-BD
IC697CPX928-CD
IC697CPX928-EE
IC697CPX928-FE
IC697CPX928-GE
IC697CPX928-HE
IC697CPX928-HF
IC697CPX928-PROGRAMMING SOFTWARE
IC697CPX928-CA
IC697CPX928-LT
IC697CPX928-RR
Common misspellings:
1C697CPX928
IC697CPX92b
IC697CPX928
| IC697CPX928 DISCONTINUED BY MANUFACTURER CPU MODULE 96 MHZ 32-BIT FLOATING POINT 6 MBYTE MEMORY 3 SERIAL PORTS | |
FEATURED BRANDS WE OFFER:
1.Allen-Bradley 1756/1769/1771/1785 Series
2.ABB 800xA/Bailey INFI90/DSQC/ Series
3.Bently Nevada 3500/3300 Monitoring System
4.Schneider Series Quantum 140 series
5.General electric IC693/IC697/IC698/IS200/DS200 Series
6.SIEMENS MOORE/S5 Series
7.Westinghouse: OVATION/WDPF/MAX1000 system spare parts
8.Invensys Triconex: Redundant fault-tolerant control system, Most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) architecture.
9.Honeywell TDC2000/TDC3000/Experion HS Series
10.YOKOGAWA CS3000 System
—————— ฅ՞• •՞ฅ ———————
—————— ฅ՞• •՞ฅ ———————
Other brand products
| Emerson | Triconex | ICS Triplex |
| KJ3002X1-BG2 12P1731X062 | 2750 7400061-210 | T8231 |
| KJ4001X1-NB1 12P3368X012 | 3503E | T8850 |
| KJ3221X1-BA1 12P2531X132 VE4035S2B1 | 2481 | T8192 |
| KJ3204X1-BK1 SE4002S1T2B6 | 4500 | T8272 |
| KJ3001X1-BJ1 12P0555X152 | 4352B | T8461C |
| 12P2532X092 KJ3222X1-BA1 | 255703 | T8191 |
| KJ3001X1-BA1 129P549X152 | 8300 | T8480 |
| KJ3102X1-BA1 12P1863X032 | 2652 | T9852 |
| KJ3002X1-BG2 12P1731X082 | 3501T | T8270 |
| KJ4001X1-BA2 | 3005 | T8110C |
| KJ3002X1-BC1 12P0681X092 | 4409 | T8846 |
| KJ4001X1-BA2 VE3051CO 12P1562X012 | 3381 | T8903 |
| VE4006P2 KJ3241X1-BA1 | 3708E | T8294 |
| VE4002S1T2B5 KJ3204X1-BA1 12P3275X022 | 3601 | T8424 |
| VE4003S5B1 KJ3002X1-BG2 12P1731X082 | 3351S2 | T8831 |
| KJ1501X1-BB1 12P0678X032 | 2551 7300057-100 | T8193 |
| KJ3222X1-BA1 KJ4001X1-CA1 | DI3301 | T8292 |
| KJ4010X1-BG1 12P0830X062 | 2652-350 | T8471 |
| 12P0631X012 | 3000110-360 | T8293 |
| KJ4010X1-BF1 12P0831X072 | 3603B | T8100 |
GE IC697CPX928 Module Funce PLC
◇ Brand new
◇ Ready for shipment
◇ Factory sealed box
PRODUCT DESCRIPTION
The IC697CPX928 is a Programmable Logic Controller manufactured by GE Automation and Controls. It is designed to fit into a single rack slot and comes with three built-in serial ports. A backplane mounted on the rack allows this device to communicate with several different modules. A run/stop control switch with three positions or specific software running from an attached computer is used to control the IC697CPX928. Seven on-board LED lights display operational status.
Features of this device include a 96MHz 80486DX4 microprocessor, floating point calculations, processor speeds of 0.4 microseconds for each Boolean function, 8K analog I/O, and 12K I/O of any mix. The IC697CPX928 supports several modules, including IC697 LAN interface modules and various display, coprocessor, communications, and link interface modules. IC660/61 bus controllers and IC697 discrete and analog I/O modules are also compatible with this device.
To program this device, connect it to a computer loaded with MS-DOS, Windows 95, or Windows NT. This connection is possible by way of a serial, parallel, or Ethernet interface. For Ethernet connections to the programming computer, special hardware is required. As the IC697CPX928 is programmed via software, hardware setup with DIP switches and jumpers is not required. Device configuration settings can be protected digitally via a password and physically by a keyswitch.
The IC697CPX928 provides six megabytes of user and program data memory. This memory is maintained by a lithium CMOS battery. Up to 256 kilobytes of optional flash memory (NVRAM) is also supported. Operating system firmware is stored in flash memory. Device disassembly or EPROM replacement is not required to update firmware.
In environments where temperatures reach 122 degrees Fahrenheit (50 Celsius), a fan capable of 70 cubic feet per minute (CFM) is required to prevent overheating.
The product manual contains detailed guidelines for installing the IC697CPX928. Rack power should be off before installing. The operation control switch should be in the stop position. The memory protection keyswitch should be in the off position. Place the CMOS battery into one of the battery connection slots. Insert the device into the rack and resume power.
Other Available Revisions for the IC697CPX928
IC697CPX928-44A726758153R01
IC697CPX928-AA
IC697CPX928-BA
IC697CPX928-BB
IC697CPX928-BC
IC697CPX928-BD
IC697CPX928-CD
IC697CPX928-EE
IC697CPX928-FE
IC697CPX928-GE
IC697CPX928-HE
IC697CPX928-HF
IC697CPX928-PROGRAMMING SOFTWARE
IC697CPX928-CA
IC697CPX928-LT
IC697CPX928-RR
Common misspellings:
1C697CPX928
IC697CPX92b
IC697CPX928
| IC697CPX928 DISCONTINUED BY MANUFACTURER CPU MODULE 96 MHZ 32-BIT FLOATING POINT 6 MBYTE MEMORY 3 SERIAL PORTS | |
FEATURED BRANDS WE OFFER:
1.Allen-Bradley 1756/1769/1771/1785 Series
2.ABB 800xA/Bailey INFI90/DSQC/ Series
3.Bently Nevada 3500/3300 Monitoring System
4.Schneider Series Quantum 140 series
5.General electric IC693/IC697/IC698/IS200/DS200 Series
6.SIEMENS MOORE/S5 Series
7.Westinghouse: OVATION/WDPF/MAX1000 system spare parts
8.Invensys Triconex: Redundant fault-tolerant control system, Most modern fault-tolerant controller based on Triple Modular Redundancy (TMR) architecture.
9.Honeywell TDC2000/TDC3000/Experion HS Series
10.YOKOGAWA CS3000 System
—————— ฅ՞• •՞ฅ ———————
—————— ฅ՞• •՞ฅ ———————
Other brand products
| Emerson | Triconex | ICS Triplex |
| KJ3002X1-BG2 12P1731X062 | 2750 7400061-210 | T8231 |
| KJ4001X1-NB1 12P3368X012 | 3503E | T8850 |
| KJ3221X1-BA1 12P2531X132 VE4035S2B1 | 2481 | T8192 |
| KJ3204X1-BK1 SE4002S1T2B6 | 4500 | T8272 |
| KJ3001X1-BJ1 12P0555X152 | 4352B | T8461C |
| 12P2532X092 KJ3222X1-BA1 | 255703 | T8191 |
| KJ3001X1-BA1 129P549X152 | 8300 | T8480 |
| KJ3102X1-BA1 12P1863X032 | 2652 | T9852 |
| KJ3002X1-BG2 12P1731X082 | 3501T | T8270 |
| KJ4001X1-BA2 | 3005 | T8110C |
| KJ3002X1-BC1 12P0681X092 | 4409 | T8846 |
| KJ4001X1-BA2 VE3051CO 12P1562X012 | 3381 | T8903 |
| VE4006P2 KJ3241X1-BA1 | 3708E | T8294 |
| VE4002S1T2B5 KJ3204X1-BA1 12P3275X022 | 3601 | T8424 |
| VE4003S5B1 KJ3002X1-BG2 12P1731X082 | 3351S2 | T8831 |
| KJ1501X1-BB1 12P0678X032 | 2551 7300057-100 | T8193 |
| KJ3222X1-BA1 KJ4001X1-CA1 | DI3301 | T8292 |
| KJ4010X1-BG1 12P0830X062 | 2652-350 | T8471 |
| 12P0631X012 | 3000110-360 | T8293 |
| KJ4010X1-BF1 12P0831X072 | 3603B | T8100 |
</template>
