Kongsberg RSER200-4 Hardware Module in Good Condition

The RSER200-4 is a module in the Kongsberg RIO200 module family. These modules provide functions such as I/O interface, network hub/repeater and serial line interface. They have the same shape and are mechanically mounted on a horizontal dual-rail system.The RSER200-4 is a four channel, galvanic isolated, serial line, interface module that can be linked to one. two or three controllers (RCUs). The four field channels are individually configurable as either RS232, RS422, RS485 or NMEA 0183 for connection to field equipment. There are three Link Channel interfaces for connection to the controllers.The RSER200-4 is powered by the RBUS connectors.

• Isolated serial line field channels

• Run/error LED on front showing module status

• Blinking LEDs on front showing transmit and receive data activity for each channel

• All internal voltages are monitored

• Allow hot module replacement

• Compliant to standards: IEC 60945 and IACS E10

Functions

The RSER200-4 is a serial line module used for connecting serial line equipment to RCU(s) in single or redundant controller systems. The module can be connected to up to three controllers(A, B, C) via the three RJ45 connectors (P1, P2, P3), and up to four field equipment(1, 2, 3, 4)via the four terminal blocks (X1, X2, X3, X4). The module contains a USB interface(P4)intended for test and service purposes. It provides functions to monitor the serial line activity and the general status of the module.

The RSER200-4 consists of the main function blocks as shown in the function diagram (see Figure for block/function diagram of the RSER200-4).

• Power supply

• Processor and channel logic

• Link and field interfaces

• USB interface

• LEDs (Status, RX, and TX)

Trixie

86-135-9950-7613

Trixie@cambia.cn

Can transport to the world.

Brand New.

1-Year-Warranty.

Fast Delivery.

24 hours to receive mail reply.