GE

GE Fanuc Series 90-30 10-Slot Remote Baseplate

In stock, ready to ship

  • Manufacturer: GE

  • Product No.: IC693CHS393

  • Product Type: PLC Remote Baseplate

  • Product Origin: USA

  • Payment: T/T

  • Weight: 1400g

  • Shipping port: Xiamen

  • Warranty: 12 months

Product Overview

The GE Fanuc IC693CHS393 is a 10-slot remote baseplate for the Series 90-30 PLC system. It expands the controller's I/O capacity by providing additional slots for compatible I/O and option modules. The remote baseplate connects to the main system through the I/O expansion bus and supports installations located at a distance from the CPU rack.

Key Specs

  • Manufacturer: GE Fanuc
  • Model: IC693CHS393
  • Product Family: Series 90-30
  • Product Type: Remote I/O Baseplate
  • Number of Slots: 10
  • CPU Slots: None
  • Internal Power Consumption: 460 mA at 5 VDC
  • Maximum Remote Expansion Distance: 700 ft (approximately 213 m)
  • Expansion Connector: 25-pin female D-sub
  • Mounting: Panel mounting

Why Choose This

  • Adds ten I/O and option module positions to a Series 90-30 system.
  • Supports remote expansion installations up to 700 ft from the CPU, subject to cable and system requirements.
  • Provides built-in isolation for the remote baseplate interface.
  • Supports compatible Series 90-30 I/O modules and power supply arrangements.

Common Questions

Q: What is the IC693CHS393?
A: It is a 10-slot remote baseplate for GE Series 90-30 PLC systems.

Q: Does it have a CPU slot?
A: No. It is a remote I/O baseplate without a CPU slot.

Q: How far can it be installed from the CPU?
A: The remote expansion distance is up to 700 ft, subject to the supported expansion cable and system configuration.

Mounting Steps

  1. Confirm the CPU model and supported number of remote baseplates.
  2. Choose a suitable panel location within the permitted expansion distance.
  3. Secure the baseplate and install a compatible power supply.
  4. Connect the I/O expansion cable and configure the rack number selection switch.
  5. Install compatible I/O modules and verify rack communication.

Buying Advice

Verify the 10-slot remote baseplate requirement, expansion distance, CPU compatibility, and connector arrangement before ordering. Check the number of remote racks supported by the installed CPU and the applicable expansion cable specification.

Link copied