IC200PWR101 Manufactured by FANUC GE FANUC

“GE FANUC IC200PWR101”

100% New 、 Authentic 、 High quality

Product Description

Made by GE Fanuc, the IC200PWR101 is a VersaMax power supply module. This product is intended to provide power to various modules and devices mounted to the rack backplane such as central processing units, network interface units, and numerous types of I/O units. This module is capable of serving as both a primary and secondary power source. It functions as a secondary source when connected to a booster carrier. The IC200PWR101 uses alternating current for its input voltage and input power, unlike some other VersaMax power units, which primarily use direct current.

The IC200PWR101 still uses direct current for its output voltages, which are 5 volts DC and 3.3 volts DC. Output current for this device is a cumulative total of both the 5-volt and 3.3-volt output voltages, but the output current must not go above 1.5 amperes. The highest output current for the 3.3 voltage setting is 0.25 amperes. For the 5-volt setting, the highest output current is 1.5 amperes minus the current from the 3.3-volt setting.

Input voltage for the IC200PWR101 is determined by voltage range and jumper installation. If a jumper is installed, the input voltage can range from 85 volts to 132 volts AC, with 120 volts AC being nominal. If no jumper is installed, the input voltage can range from 176 volts to 264 volts AC, with 240 volts AC being nominal. The IC200PWR101 can operate at 120 volts AC without a jumper installed. Warning: Jumpers must not be used at 240 volts input voltage.

The IC200PWR101 has a holdup time of 20 milliseconds and a frequency range of 47-63 Hertz. Input power is 27 volt-amps. This device is protected against short circuits and overloads.

You can learn about the following other GE products

Fanuc CNC

GE 90-30 Series PLC

GE 90-70 Series PLC

GE PACSystems RX3i

GE PACSystems RX7i

PACSystemsRXi

GE Genius I/O

GE Mark VIe

GE Multilin

GE PAC8000

GE QuickPanel

GE VMIC

GE VersaMax