GE

GE IC693MDR390 8-In/8-Out Mixed I/O Module

In stock, ready to ship

  • Manufacturer: GE

  • Product No.: IC693MDR390

  • Product Type: Combination Discrete I/O Module

  • Product Origin: USA

  • Payment: T/T

  • Weight: 1700g

  • Shipping port: Xiamen

  • Warranty: 12 months

Product Overview

The GE Fanuc IC693MDR390 is a combination discrete I/O module for the Series 90-30 PLC system. It provides eight 24 VDC input points and eight normally open relay output points in one module. The relay outputs support both AC and DC loads, allowing a single module to handle field signal acquisition and discrete control functions.

Key Specs

  • Manufacturer: GE Fanuc
  • Model: IC693MDR390
  • Product Family: Series 90-30
  • Product Type: Combination Discrete Input/Output Module
  • Input Channels: 8
  • Input Rated Voltage: 24 VDC
  • Input Voltage Range: -30 to +32 VDC
  • Output Channels: 8
  • Output Type: Normally Open Relay
  • DC Output Range: 5 to 30 VDC
  • AC Output Range: 5 to 250 VAC, 50/60 Hz
  • Maximum Load per Output: 2 A
  • Maximum Load per Common: 4 A
  • Input Response Time: 7 ms typical
  • Output Response Time: 15 ms maximum
  • Isolation: 1500 VAC RMS between field and logic side

Why Choose This

  • Combines eight DC inputs and eight relay outputs in one module.
  • Supports 24 VDC field input signals.
  • Relay outputs accommodate compatible AC and DC control loads.
  • Provides a practical mixed-I/O solution for Series 90-30 systems.

Common Questions

Q: What is the I/O configuration?
A: The module provides eight 24 VDC inputs and eight normally open relay outputs.

Q: Can the relay outputs switch AC loads?
A: Yes. The specified AC operating range is 5 to 250 VAC at 50/60 Hz.

Q: What is the maximum output current?
A: Each output supports up to 2 A, subject to the 4 A maximum per common and the applicable load limitations.

Mounting Steps

  1. Verify compatibility with the Series 90-30 PLC baseplate.
  2. Check the input and output wiring requirements.
  3. Isolate field power before installation and wiring.
  4. Install the module in an available I/O slot and connect field devices according to the wiring diagram.
  5. Test input status and relay output operation during commissioning.

Buying Advice

Confirm the mixed 8-input/8-output configuration before ordering. Check the input voltage, relay load type, current limits, and terminal wiring. Do not confuse IC693MDR390 with IC693MAR590, which has a different AC input configuration.

Link copied