Bently Nevada 330703-000-060-10-02-00 3300 XL 11 mm Proximity Probe
Bently Nevada 330703-000-060-10-02-00 3300 XL 11 mm Proximity Probe
Bently Nevada 330703-000-060-10-02-00 3300 XL 11 mm Proximity Probe
Bently Nevada 330703-000-060-10-02-00 3300 XL 11 mm Proximity Probe
Bently Nevada 330703-000-060-10-02-00 3300 XL 11 mm Proximity Probe
Bently Nevada 330703-000-060-10-02-00 3300 XL 11 mm Proximity Probe

Bently Nevada

Bently Nevada 330703-000-060-10-02-00 3300 XL 11 mm Proximity Probe

In stock, ready to ship

  • Manufacturer: Bently Nevada

  • Product No.: 330703-000-060-10-02-00

  • Product Type: 3300 XL 11 mm Proximity Probe

  • Product Origin: USA

  • Payment: T/T

  • Weight: 650g

  • Shipping port: Xiamen

  • Warranty: 12 months

Bently Nevada 330703-000-060-10-02-00 3300 XL 11 mm Proximity Probe

Product Overview

The Bently Nevada 330703-000-060-10-02-00 is a non-contact eddy current sensor used as part of the 3300 XL 11 mm Proximity Transducer System. It measures the gap between the probe tip and a rotating shaft to provide high-resolution displacement data for vibration, axial position, and thrust monitoring. This probe is commonly deployed in turbomachinery such as steam turbines, compressors, and generators, where accurate shaft dynamics monitoring is essential for equipment protection and performance optimization.

Part Number Breakdown

  • 330703: 3300 XL 11 mm probe, M14 × 1.5 thread, no armor

  • -000: Unthreaded length (0 mm)

  • -060: Case length (60 mm)

  • -10: Cable length (1.0 meter / 3.3 ft)

  • -02: Connector type with protector (ClickLoc coaxial with protection)

  • -00: No agency approvals

Technical Specifications

Parameter Specification
Probe Tip Diameter 11 mm (0.43 in)
Linear Range 4.0 mm (160 mils)
Nominal Sensitivity 3.94 V/mm (100 mV/mil)
Thread Size M14 × 1.5
Connector Type ClickLoc gold-plated coaxial with protector
Operating Temperature -51 °C to +177 °C
System Compatibility 3300 XL 11 mm Proximitor Sensor

Engineering Advantages

  • Extended Linear Measurement Range
    The 11 mm probe provides a 4.0 mm linear range, enabling accurate measurement of large shaft movements in heavy turbomachinery.

  • Connector Protection Design
    The integrated connector protector reduces the risk of contamination, moisture ingress, and mechanical damage, improving reliability in harsh environments.

  • Thermal and Material Stability
    The PPS probe tip maintains dimensional and electrical stability under extreme temperatures, ensuring long-term calibration integrity.

  • Secure ClickLoc Connection
    Gold-plated ClickLoc connectors provide a vibration-resistant, corrosion-resistant interface that maintains consistent signal quality.

  • High-Pressure Compatibility
    Designed to operate in pressurized bearing housings (up to 70 psi), allowing direct installation without additional sealing hardware.

FAQs

Is this probe brand new and original?
Yes, it is supplied as 100% brand new, original Bently Nevada hardware with factory packaging and full traceability.

Can this probe be used with an 8 mm Proximitor?
No, it must be paired with a compatible 11 mm Proximitor. Mixing probe and Proximitor sizes results in incorrect scaling and inaccurate measurements.

What is the function of the 60 mm case length?
The 60 mm case length allows proper mechanical reach through mounting hardware while keeping the connector positioned outside high-temperature zones.

Does cable length affect calibration?
Yes, total system length (probe + extension cable) must match the calibration requirements of the Proximitor (commonly 5 m or 9 m systems) to ensure accurate readings.
Link copied