Bently Nevada 330130-080-01-05 3300 XL Armored Extension Cable
Bently Nevada 330130-080-01-05 3300 XL Armored Extension Cable
Bently Nevada 330130-080-01-05 3300 XL Armored Extension Cable
Bently Nevada 330130-080-01-05 3300 XL Armored Extension Cable
Bently Nevada 330130-080-01-05 3300 XL Armored Extension Cable
Bently Nevada 330130-080-01-05 3300 XL Armored Extension Cable

Bently Nevada

Bently Nevada 330130-080-01-05 3300 XL Armored Extension Cable

In stock, ready to ship

  • Manufacturer: Bently Nevada

  • Product No.: 330130-080-01-05

  • Product Type: 3300 XL Extension Cable

  • Product Origin: USA

  • Payment: T/T

  • Weight: 400g

  • Shipping port: Xiamen

  • Warranty: 12 months

Bently Nevada 330130-080-01-05 3300 XL Armored Extension Cable

Technical Specifications

The 330130-080-01-05 is a high-performance extension component designed for the 3300 XL 8mm Proximity Transducer System. This configuration combines an 8.0-meter physical reach with robust mechanical armoring and global safety certifications, ensuring stable signal transmission for critical machinery protection systems.

  • Model Number: 330130-080-01-05

  • Total Cable Length: 8.0 Meters (26.2 Feet)

  • Protection Interface: Flexible stainless steel armor (Option 01)

  • Hazardous Area Rating: Multiple Approvals (Option 05 - ATEX, IECEx, CSA)

  • Standard Weight: 34 g/m

  • Conductor Architecture: 75 ohm triaxial, FEP insulated

  • Temperature Range: -51°C to +177°C (-60°F to +350°F)

  • Dielectric Strength: High-performance fluoroethylene propylene insulation

  • Manufacturing: Made in U.S.A. (Certificate of Origin/COO available)

Industrial Application scenarios

The 330130-080-01-05 is specifically engineered for environments where both mechanical durability and explosion-proof compliance are non-negotiable. The integrated armor acts as a built-in conduit, shielding the internal triaxial cable from sharp bends or abrasive surfaces.

  • Reliable vibration monitoring in ATEX/IECEx Zone 0 and Zone 1 locations

  • Thrust position sensing in large-scale steam turbines and compressors

  • Installation in high-traffic machine decks where cabling is exposed to physical impact

  • Signal routing in offshore oil and gas platforms requiring ruggedized hardware

Frequently Asked Questions

  • What certifications are included under the 05 Agency Approval?The 330130-080-01-05 features "Multiple Approvals," which typically includes North American (CSA/NRTL) and International (ATEX/IECEx) certifications for use in intrinsically safe and non-incendive environments.

  • Is the armor liquid-tight?The standard armor on the 330130-080-01-05 provides mechanical protection against crushing and abrasion. For applications involving constant immersion in fluids, verify if additional connector protectors are required.

  • Why is the 8.0-meter length significant?Proximity systems must match specific electrical lengths (typically 5m or 9m total). This 8.0m cable is usually paired with a 1.0m probe to reach the standard 9.0m system calibration required by the Proximitor sensor.
Link copied