Bently Nevada 330130-040-01-05 3300 XL Extension Cable

Product Description

The 330130-040-01-05 is a high-performance, 4.0-meter extension cable designed for the Bently Nevada 3300 XL 8 mm Proximity Transducer system. Engineered for critical machinery protection, this specific model features a factory-installed connector protector and international agency certifications. It provides a robust, low-loss signal bridge between the proximity probe and the Proximitor sensor, ensuring precise displacement and vibration measurements even in the most demanding hazardous industrial environments.

Technical Specifications

• Model Number: 330130-040-01-05

• Manufacturer: Bently Nevada (Baker Hughes)

• Series: 3300 XL 8 mm Proximity System

• Cable Length: 4.0 meters (13.1 feet)

• Connector Protector Included: Yes (Option 01)

• Agency Approval Option: 05 (CSA, ATEX, IECEx Certified)

• Compatibility: 3300 XL Proximitor Sensors

• Weight: 0.25 kg 

Operational Benefits & Safety

This model is configured for environments where safety is non-negotiable. The inclusion of the "05" agency approval suffix confirms that the cable adheres to strict international standards for use in explosive or hazardous atmospheres. Furthermore, the connector protector (Option 01) acts as a physical barrier against dust, moisture, and chemical ingress at the sensitive mating point between the probe and extension cable, which is critical for preventing signal drift or localized corrosion.

Frequently Asked Questions

What makes the "05" approval option necessary?

The "05" option ensures the cable is rated for intrinsic safety or explosion-proof installations in hazardous zones (ATEX/IECEx/CSA). Using a non-certified cable in these areas is a violation of safety protocols and poses an explosion risk.

Can this cable be used with a 5-meter system?

The 3300 XL system is "system-calibrated." If your Proximitor is configured for a 5-meter total system, you must use an extension cable and probe combination that equals 5 meters in total length. Always verify your total system length before installation.

Is the connector protector reusable?

The connector protector is designed to be installed during initial assembly. If removed during maintenance, it must be inspected for damage or degradation before being reinstalled to ensure the environmental seal remains intact.