Bently Nevada 330101-00-40-05-02-00 8mm Proximity Transducer Probe
Bently Nevada 330101-00-40-05-02-00 8mm Proximity Transducer Probe
Bently Nevada 330101-00-40-05-02-00 8mm Proximity Transducer Probe
Bently Nevada 330101-00-40-05-02-00 8mm Proximity Transducer Probe
Bently Nevada 330101-00-40-05-02-00 8mm Proximity Transducer Probe
Bently Nevada 330101-00-40-05-02-00 8mm Proximity Transducer Probe

Bently Nevada

Bently Nevada 330101-00-40-05-02-00 8mm Proximity Transducer Probe

In stock, ready to ship

  • Manufacturer: Bently Nevada

  • Product No.: 330101-00-40-05-02-00

  • Product Type: 8mm Proximity Transducer Probe

  • Product Origin: USA

  • Payment: T/T

  • Weight: 300g

  • Shipping port: Xiamen

  • Warranty: 12 months

Bently Nevada 330101-00-40-05-02-00 8mm Proximity Transducer Probe

Product Description
The 330101-00-40-05-02-00 sets the industry standard for high-precision machinery protection. As a core component of the Bently Nevada 3300 XL 8mm Proximity Transducer System, this eddy current probe delivers continuous, non-contact measurement of vibration and position in critical rotating machinery.

Designed for seamless integration with 3300 XL Proximitor Sensors, the 330101-00-40-05-02-00 (3300 XL 8mm Probe) converts the physical distance between the probe tip and the target into a proportional voltage signal. Its advanced PPS (polyphenylene sulfide) overmold tip ensures exceptional chemical resistance and structural integrity, even in high-pressure environments.

Technical Specifications

  • Transducer System: 3300 XL 8mm

  • Standard Linear Range: 2.0 mm (80 mils), starting at ~0.25 mm (10 mils) from the probe tip

  • Nominal Sensitivity: 7.87 V/mm (200 mV/mil)

  • Operating Temperature Range: -51 °C to +177 °C (-60 °F to +351 °F)

  • Input Voltage Requirement: -17.5 VDC to -26 VDC (via Proximitor)

  • Ingress Protection: IP67, NEMA 4X

  • Probe Diameter: 8 mm

  • Thread Size: 3/8-24 UNF

  • Case Length: 4.0 inches

  • Total Length: 0.5 meters (1.6 feet)

  • Connector Type: Miniature coaxial ClickLoc connector (gold-plated)

Primary Applications

  • Radial vibration monitoring on fluid-film bearing motors and pumps

  • Axial (thrust) position measurement for steam and gas turbines

  • Eccentricity and phase reference (Keyphasor) sensing

  • Shaft alignment and thermal expansion analysis in power generation

Frequently Asked Questions
Q: Is the 3300 XL probe backward compatible?
A: Yes. The 330101-00-40-05-02-00 probe, cable, and Proximitor are interchangeable with non-XL 3300 5mm and 8mm components. Optimal performance occurs when used as a complete 3300 XL system.

Q: Does this probe require a specific extension cable?
A: Yes. The total length of the probe and extension cable must match the Proximitor’s calibration (typically 5.0 or 9.0 meters).
Link copied