330130-080-02-00 Bently Nevada 3300 XL Extension Cable

Technical Specifications

The 330130-080-02-00 is a specialized 8.0-meter extension cable designed for the 3300 XL 8mm proximity transducer system. This specific configuration includes factory-installed connector protectors, which provide a critical environmental seal for the connection point between the probe and the extension cable, preventing moisture or oil ingress that could degrade signal integrity.

• Model Number: 330130-080-02-00

• Total Length: 8.0 Meters (26.2 Feet)

• Protection Option: Standard cable with integrated connector protectors (Option 02)

• Core Material: 75 ohm triaxial conductor

• Insulation Type: Fluoroethylene propylene (FEP) for high-temperature resistance

• Capacitance Performance: 69.9 pF/m (21.3 pF/ft) typical

• Agency Certification: No approvals required (Option 00)

• Operating Limits: -51°C to +177°C (-60°F to +350°F)

• Manufacturing: Made in U.S.A. (COO certification available)

Deployment and Utility

The 330130-080-02-00 is ideally suited for installations where the cable junction is located in "wet" areas of the machine. The FEP insulation is highly resistant to corrosive industrial fluids, while the connector protectors ensure a stable electrical connection even in high-humidity environments.

• Ideal for internal machine mounting in oil-mist environments

• Used for axial thrust and radial vibration monitoring on large rotating assets

• Standard choice for clean-room or controlled indoor machinery where hazardous area ratings are not mandated

• Maintains the 9.0-meter system length requirement when paired with a 1.0-meter probe

Frequently Asked Questions

• What is the purpose of the connector protectors on the 330130-080-02-00?

  The protectors are clear plastic sleeves that slide over the joined connectors, creating a seal against oil, water, and other contaminants that can cause electrical "noise" or signal loss.

• Can this cable be used with a 0.5-meter probe?

  Yes, but the total system length (cable plus probe) must match the calibration of the Proximitor sensor. Using the 330130-080-02-00 typically requires an 8.5m or 9.0m system calibration.

• Does the FEP insulation protect against chemical exposure?

  Yes, FEP is chemically inert and provides excellent protection against most industrial lubricants, solvents, and fuels used in power generation and refining.