Views: 666 Author: holy Publish Time: 2024-04-03 Origin: Site
The TK-3 Proximity System Test Kit is designed to simulate shaft vibration and position for calibrating Bently Nevada monitors. It ensures accurate transducer inputs and monitor readings. The kit includes:
Removable spindle micrometer assembly: Accommodates probe diameters from 5 mm to 19 mm (0.197 in to 0.75 in). It allows users to move the target toward or away from the probe tip in calibrated increments and record the output from the Proximitor Sensor using a voltmeter. The assembly features a magnetic base for field use.
Motor-driven wobble plate: Used for calibrating vibration monitors. A swing-arm assembly holds the proximity probe in place. It uses a universal probe mount similar to the spindle micrometer assembly. By adjusting the probe using the absolute scale factor of the proximity probe with a multimeter, users can find a position where the desired mechanical vibration is present. No oscilloscope is required.
Mechanical vibration signal: Generated by the TK-3, ranging from 50 to 254 μm (2 to 10 mils) peak-to-peak. This signal allows users to compare a vibration monitor's reading to the known mechanical vibration signal input viewed by the proximity probe.
♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡ ♡
About Us
♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝ ◡̈°
Are you looking for automation PLC DCS modules?
We have a large inventory in stock!!!
“Cambia Automation Limited”
Click!! Click!!
Our online store automationplc.en.alibaba.com www.cambiaplc.com ♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝♡⃝ ◡̈°